Home CompanyProfile New&Trends Productscenter Projectcase Marketing ContactUs Sitemap
 
  Products
   
 
B&G-100 Series High-strength Bonded Anchor
  - B&G-101 Series High-strength Bonded Anchor
  - B&G-102 ethylene-based-type high-strength chemic
B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
B&G-300 High Strength Building Adhesive Anchor
  - B&G-301 High Strength Building Adhesive Anchor
  - B&G-302 Epoxy Building Adhesive Anchor
B&G-400 Binding Steel Structural Adhesive
B&G-500 Perfusion Structural Adhesive
B&G-600 Slot Filling Adhesive
B&G-700 Sealing Adhesive
B&G-800 Series Carbon Fiber Adhesive
  - B&G-801 Series Carbon Fiber Adhesive
  - B&G-802 Series Carbon Fiber Adhesive
  - B&G-803 Series Carbon Fiber Adhesive
B&G-900 Stone Dry-cladding Adhesive
  - B&G-901 Stone Dry-cladding Adhesive
  - B&G-902 Epoxy Adhesive for Stone Dry-cladding
Resin Anchoring Agent
FRP Rebar material
  - FRP Rebar material
  - FRP Anchor Rod
Carbon fiber (Basalt) Cloth Material
 
 
B&G-600 Slot Filling Adhesive
    1.  Product profile
B&G-600 slot filling adhesive is A and B two-component modified epoxy low viscosity liquid adhesives. With low viscosity, less releases heat, mix ratio is relaxed, suitable for long period, poured process is simple, etc. features.
    4. Ratio of mixed adhesive  
   

A and B component mixed adhesive ratio: 3:1

    5. Operational process  key points of crack grouting:
    
    6. Technical parameters
    
    
    7.  Notice 
  Construction environment should be aeration-drying, paste face is clean and no oil pollution
  Curing temperature is not less than 5, environmental temperature for 20-25, curing time is not less than 3 days, when the average temperature for 10, curing time shall be not less than 7 days.
  When construction, must be wearing gloves, mask, goggles and safety helmet etc. protective equipment
 If you get into the skin or clothes carelessly, usable acetone cleaning and rinse with plenty of water
  If edible careless or splashing into the eyes, should seeing the doctor immediately.
8. Packing specification
 
The product adopts the big and small plastic barrel packed (big barrel for A component, small barrel for B component)
  14kg/group, A component: 10.5kg, B component: 3.5kg
 9. Transport and storage
 
The product is belong to non-toxic and non-dangerous goods, according to general chemical building materials for transportation,In transit shall not insolate, rain, inversion or damage to the packing,A and B two components should be stored apart, avoid mixed,The product should be stored at normal temperature (25) and dry store, storage life for 12 months
    Back>>
     
Adhesive AnchorsHomeCompanyProfile | New&Trends | Productscenter | Projectcase | Marketing | ContactUs | SiteManagement | Home
Address: 108, Lane 132, Shanghai Gulang Road, Tel: 021-66401529 Fax :021-66401523
Copyright © 2007 All rights reserved  Copyright:Shanghai Belgoo Architecture Science & Technology Co., Ltd.
沪ICP备05061187号