Home CompanyProfile New&Trends Productscenter Projectcase Marketing ContactUs Sitemap
 
  Products
   
 
B&G-100 Series High-strength Bonded Anchor
  - B&G-101 Series High-strength Bonded Anchor
  - B&G-102 ethylene-based-type high-strength chemic
B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
B&G-300 High Strength Building Adhesive Anchor
  - B&G-301 High Strength Building Adhesive Anchor
  - B&G-302 Epoxy Building Adhesive Anchor
B&G-400 Binding Steel Structural Adhesive
B&G-500 Perfusion Structural Adhesive
B&G-600 Slot Filling Adhesive
B&G-700 Sealing Adhesive
B&G-800 Series Carbon Fiber Adhesive
  - B&G-801 Series Carbon Fiber Adhesive
  - B&G-802 Series Carbon Fiber Adhesive
  - B&G-803 Series Carbon Fiber Adhesive
B&G-900 Stone Dry-cladding Adhesive
  - B&G-901 Stone Dry-cladding Adhesive
  - B&G-902 Epoxy Adhesive for Stone Dry-cladding
Resin Anchoring Agent
FRP Rebar material
  - FRP Rebar material
  - FRP Anchor Rod
Carbon fiber (Basalt) Cloth Material
 
 
B&G-200 Series Injection Adhesive Anchor
     1. Product profile

B&G-200 series injection adhesives anchor have B&G-201 injection adhesives anchor (economy type), B&G-202 injection adhesives anchor (vinyl type), B&G-203 injection adhesives anchor (epoxy type) three specification. Product use special injection gun with inject, two components in replaceable static mixer fully mixing injected directly into drilling.

2. Product features

 High strength, good adhesiveness, durability is good, as pre-cast

Without the adhesive composition, simple construction, speediness-conveniency

Without swelling stress, edge pitch is small, won't cause base material damage, also has the reinforced function

Thermal stability, under normal temperature non-creeping, resistant to connect body welding temperature transient

Acid and alkali resistant, anti-aging, with good antiseismic

Hardware plastic packaging, unspent glue reusable, won't cause of waste

3. Range of application

In concrete members implant rebar and bolts

To fix curtain wall dry hanging support

Building structure of reinforcing and framework bonded rebar

To fix various of equipment foundation

Anchorage connect of the steel structure and concrete structure

Reinforce of the railways, highways, bridges, water conservancy expansion project

To fix billboard, tunnel pipeline, elevated road sound insulation board and guardrail

    

4. Curing time

 
B&G-201 model curing time

    
    

B&G-202 model curing time

    
    

B&G-203 model curing time

    
    

5. Operational process

    
    Drilling: According to technical parameters drilling.

Hole cleaning: Using air cylinder or compressed air and brush cleaning drilling, until clean.

Inject adhesive: In plastic bottles install static mixer, with adhesive gun to drain front part of incomplete mixing uniformity adhesive materials, and then by the hole bottom to aperture inject adhesive, adhesive material usually filled with hole deep 1/2-2/3.

Anchoring: With the rebar or screw slowly screwed in hole, within curing time, be sure not to disturbance

     6. Technical parameters

B&G-200 series use together with screw
    
    

B&G-200 series used in bonded rebar

    
    Introduction:
Grade II reinforcing steel: fy=310N/MM²(Design strength), fyk=335N/MM²( Standard strength)

Concrete strength C30, fuk,cubc,150=30N/MM², Construction temperature: -5--40
Used for bonded rebar of the base material concrete strength is not below C20, and have certain volume, should not be planted in weathering steel, severe cracking and leakiness of the concrete.

If use water drill into the hole, the anchorage depth based on double diameter of reinforced.

Margins, pitch and construction of bonded rebar shall conform to rules and requirements of the back anchorage technical regulation of the concrete structure, in the table, reinforced anchorage depth without considering the influence of spacing and edge distance to bearing capacity, the specific project is based on design.

Adhesive layer whether full, it will directly affect the size of the anchoring force.

Actual anchorage depth is based on unit design.

Without considering the characteristic value of the influence factor of safety, related technical details, please with contact Belgoo engineering department.

    

7. Lookup table of steel bar performance parameter

    Grade HRB335 reinforcement
    
    Grade HRB335 reinforcement
    
    8. Notice

Thoroughly clean the drilling, rod body rotate implant hole, before not curing, strictly prohibit touches the rod body.

When the winter construction, can be placed the about 40 warm water or hothouse pre-heating.

Unused glue tighten bottle cap, next time can continue to use.

When construction, must be wearing gloves, mask, goggles and safety helmet etc. protective equipment.

If you get into the skin or clothes carelessly, usable acetone cleaning and rinse with plenty of water, if edible careless or splashing into the eyes, should seeing the doctor immediately.

9. Packing, transport and storage

The product adopts double plastic hard tube packing, outer box packing for 30 piece/box, 360ml/piece.

The product is belong to non-dangerous goods, according to general chemical building materials for transportation.

In transit shall not insolate, rain, inversion or damage to the packing.

The product should be keep out of the sun stored in a shady and cool (5-25), dry warehouse, storage life for 3-12 months.

    Back>>
     
Adhesive AnchorsHomeCompanyProfile | New&Trends | Productscenter | Projectcase | Marketing | ContactUs | SiteManagement | Home
Address: 108, Lane 132, Shanghai Gulang Road, Tel: 021-66401529 Fax :021-66401523
Copyright © 2007 All rights reserved  Copyright:Shanghai Belgoo Architecture Science & Technology Co., Ltd.
沪ICP备05061187号