Home CompanyProfile New&Trends Productscenter Projectcase Marketing ContactUs Sitemap
B&G-100 Series High-strength Bonded Anchor
  - B&G-101 Series High-strength Bonded Anchor
  - B&G-102 ethylene-based-type high-strength chemic
B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
B&G-300 High Strength Building Adhesive Anchor
  - B&G-301 High Strength Building Adhesive Anchor
  - B&G-302 Epoxy Building Adhesive Anchor
B&G-400 Binding Steel Structural Adhesive
B&G-500 Perfusion Structural Adhesive
B&G-600 Slot Filling Adhesive
B&G-700 Sealing Adhesive
B&G-800 Series Carbon Fiber Adhesive
  - B&G-801 Series Carbon Fiber Adhesive
  - B&G-802 Series Carbon Fiber Adhesive
  - B&G-803 Series Carbon Fiber Adhesive
B&G-900 Stone Dry-cladding Adhesive
  - B&G-901 Stone Dry-cladding Adhesive
  - B&G-902 Epoxy Adhesive for Stone Dry-cladding
Resin Anchoring Agent
FRP Rebar material
  - FRP Rebar material
  - FRP Anchor Rod
Carbon fiber (Basalt) Cloth Material
B&G-801 Series Carbon Fiber Adhesive
    1. Product profile  B&G-800 series carbon fiber adhesive is A and B two-component epoxy modified adhesive, by made of B&G-801 bottom coating adhesive, B&G-802 make level adhesive and B&G-803 adhesive, is special adhesive of the carbon fiber reinforce, three adhesive divide reinforce construction used in different processes.
 2. Product features  B&G-801 bottom coating adhesive has low viscosity, strong penetration, can well into the concrete surface crack, and concrete has good adhesion.B&G-802 make level adhesive with viscosity moderate, easy scraping and high strength,B&G-803 paste adhesive with low viscosity, high strength, infiltrative  and good permeability,After cured, excellent of adhesive layer physical mechanical properties and toughness properties.Strange thixotropy and less flowing in construction,Anti-aging, good medium (acid, alkali, water) resistance,Room temperature cured, excluding volatile solvent, high adhesive strength,A and B mixed adhesive ratio is more wider, use convenient, non-toxic, easy site operation.
3. Range of application  B&G - 801 bottom adhesive is mainly used for paint of reinforcing member surface layer,B&G-802 take level adhesive is mainly used for reinforcing member surface defect repair and make level,
    4.Technical parameters
    5. Ratio of mixed adhesive component mixed adhesive ratio: 3:1 and 1:1
6. Operational process  Carbon fiber reinforced construction method and key points:Construction preparation.According to the construction site and reinforced concrete members of the actual situation contrast design drawing, ensure construction project and construction plan, and before construction preparation work
Surface treatment
Remove the reinforcement member surface of the paint layer and exfoliation, loose, honeycombing, corrosion, etc. Show concrete structure layer: according to design requirements for cracks avoid pouring or closed treatment. Be concrete surface should be smooth grinding. Corner paste place to avoid line guide angle treatment and the burnish arc shape, arc radius should not be less than 20mm: concrete surface should be clean and dry.
According to the ratio weighing B&G-801 bottom adhesive of A and B component. A: B = 3:1 ratio in clean containers completely mixed. Use roller brush or brush will fully mixed evenly coating to concrete surface. Wait the bottom dry (usually for 2 hours) immediately next process of construction,According to the ratio weighing B&G-802 take level adhesive A and B two components. A: B = 3 1 proportion in clean containers will be fully mixing, volume good B&G-802 take level adhesive with defects of concrete with scraper to member surface repairing and take level treatment, wait after cured (with finger feeling dry advisable, usually for 2 ~ 4 hours) immediately next process of construction.
Paste carbon fiber sheeting
According to the size of the design requirements of cutting carbon fiber cloth. According to the ratio weighing B&G-803 paste adhesive A and B two component. According to A, B = 3:1 ratio in clean containers and fully mixing paste evenly had parts and pasting CFRP. In the lap, corner can be appropriately painting more. Use the roller of the fine smooth direction. Squeeze in multiple rolling bubble gum paste make full saturate B&G-802 of carbon fiber cloth rolling without damage. Carbon paste must answer the multilayer. The surface layer of the last carbon fiber cloth evenly daub one B&G-803 paste adhesive
With reference to the carbon fiber sheets reinforced concrete structure technical regulation CECSl46=2003
    7.Notice Construction environment should be ventilation, dry, stick surface is clean and no smeary,Curing temperature is not less than 5, environmental temperature for 20-25, curing time is not less than 3 days, when the average temperature for 10, curing time is not less than 7 days.When construction, must be wearing gloves, mask, goggles and safety helmet etc. protective equipment,If you get into the skin or clothes carelessly, usable acetone cleaning and rinse with plenty of water,If edible careless or splashing into the eyes, should seeing the doctor immediately.
8. Packing specification  The product adopts the big and small plastic barrel packed (big barrel for A component, small barrel for B component),20kg/group, divided into A component: 15kg, B component: 5kg and A component: 10kg, B component: 10kg two packing.
9.Transport and storage 
The product is belong to non-toxic and non-dangerous goods, according to general chemical building materials for transportation
In transit shall not insolate, rain, inversion or damage to the packing
A and B two components should be stored apart, avoid mixed
The product should be keep out of the sun stored in a shady and cool (5-25), dry warehouse, storage life for 12 months
Adhesive AnchorsHomeCompanyProfile | New&Trends | Productscenter | Projectcase | Marketing | ContactUs | SiteManagement | Home
Address: 108, Lane 132, Shanghai Gulang Road, Tel: 021-66401529 Fax :021-66401523
Copyright © 2007 All rights reserved  Copyright:Shanghai Belgoo Architecture Science & Technology Co., Ltd.