Home CompanyProfile New&Trends Productscenter Projectcase Marketing ContactUs Sitemap
B&G-100 Series High-strength Bonded Anchor
  - B&G-101 Series High-strength Bonded Anchor
  - B&G-102 ethylene-based-type high-strength chemic
B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
  - B&G-200 Series Injection Adhesive Anchor
B&G-300 High Strength Building Adhesive Anchor
  - B&G-301 High Strength Building Adhesive Anchor
  - B&G-302 Epoxy Building Adhesive Anchor
B&G-400 Binding Steel Structural Adhesive
B&G-500 Perfusion Structural Adhesive
B&G-600 Slot Filling Adhesive
B&G-700 Sealing Adhesive
B&G-800 Series Carbon Fiber Adhesive
  - B&G-801 Series Carbon Fiber Adhesive
  - B&G-802 Series Carbon Fiber Adhesive
  - B&G-803 Series Carbon Fiber Adhesive
B&G-900 Stone Dry-cladding Adhesive
  - B&G-901 Stone Dry-cladding Adhesive
  - B&G-902 Epoxy Adhesive for Stone Dry-cladding
Resin Anchoring Agent
FRP Rebar material
  - FRP Rebar material
  - FRP Anchor Rod
Carbon fiber (Basalt) Cloth Material
B&G-901 Stone Dry-cladding Adhesive
    1. Product Profile  B&G-901 stone dry-cladding adhesive by A and B two-component adhesive of the mixed high-strength resinon for raw materials, applicable to all kinds of stone of repair, adhesive positioning, seam filling and various types of pavement construction.
2. Product features  High bonding strength, good thixotropy and not flowing

After cured, stable performance and resistance to freezing-thawing is good

Anti-seismic and anti-aging

Good performance of water resistant and corrosion resistance

No oil impregnate, no pollution stone

After cured, excellent toughness and impact resistance capability

After using the surface polishing effect is good

3. Range of application  Curtain wall installation of stone inner and outer wall dry hanging and metal pendant, adhesive of metal and concrete wall, metal and metal
Inside wall the direct bonding marble, granite stone etc

When wet installed stone before filling fast positions

Stone, ceramic, Bo changes bricky etc. material repairing and fast paste positioning

Stone, concrete, metal, wood, glass, porcelain and partial plastic self-adhesion and mutual-adhesion

    5. Ratio of mixed adhesivecuring agent ratio: 5:1 and 1:1 6. Operational process

7. Notice  Each mixed adhesive may not be too many, should be mixed when using, otherwise it will cause of waste

Inside the box, unused the adhesive be sure not mix in curing agent

Paste surface should keep dry and comfortable (moisture percentage is not more than 15%), clean and without oil stain

The paste surface too smooth, should be roughening, if have affects the adhesion effect, must remove.

When construction, must be wearing gloves, mask, goggles and safety helmet etc. protective equipment

If you get into the skin or clothes carelessly, usable acetone cleaning and rinse with plenty of water

If edible careless or splashing into the eyes, should seeing the doctor immediately.

8. Packing specification

The product adopts the big and small plastic barrel packed (big barrel for A component, small barrel for B component)

18kg/group, A component: 15kg, B component: 3kg

10kg/group, A component: 5kg, B component: 5kg

30kg/group, A component: 15kg, B component:15kg

9. Transport and storage

The product is belong to non-toxic and non-dangerous goods, according to general chemical building materials for transportation

In transit shall not insolate, rain, inversion or damage to the packing

A and B two components should be stored apart, avoid mixed

The product should be keep out of the sun stored in a shady and cool (5-25), dry warehouse, storage life for 6 months

Adhesive AnchorsHomeCompanyProfile | New&Trends | Productscenter | Projectcase | Marketing | ContactUs | SiteManagement | Home
Address: 108, Lane 132, Shanghai Gulang Road, Tel: 021-66401529 Fax :021-66401523
Copyright © 2007 All rights reserved  Copyright:Shanghai Belgoo Architecture Science & Technology Co., Ltd.